{"id":17666,"date":"2021-02-08T17:36:45","date_gmt":"2021-02-08T23:36:45","guid":{"rendered":"https:\/\/surplused.com\/?p=17666"},"modified":"2021-06-30T20:07:58","modified_gmt":"2021-07-01T01:07:58","slug":"pistol-phylogeny-part-1-introduction","status":"publish","type":"post","link":"https:\/\/surplused.com\/index.php\/2021\/02\/08\/pistol-phylogeny-part-1-introduction\/","title":{"rendered":"Pistol Phylogeny Part 1 – Introduction"},"content":{"rendered":"

For some time now, the author of this essay has harbored a fascination with firearms designs.\u00a0 More specifically this interest has lingered on the various forms of operating and locking systems that have been employed in firearms over the years.\u00a0 And nowhere is that variety more apparent (and more \u201caffordable\u201d to collect) than in semi-automatic handguns.<\/p>\n

Now perhaps it is his background in biological science, but in order to order his collecting priorities, he has attempted to better categorize these sundries systems and locks into a phylogenetic tree of sorts \u2013 a family tree of related designs in categories and subcategories.\u00a0 To that end is presented an essay on the\u2026<\/p>\n

PHYLOGENETIC PROSPECTUS on reasonably PURCHASABLE PISTOLS<\/strong><\/p>\n

The more difficult task that must first be tackled, is identifying and arranging the widely varied designs.\u00a0 There are lots of opinions, often conflicting, about the nomenclature surrounding this topic, but herein the author has attempted to develop a framework for evaluating and defining these systems more concisely.\u00a0 To do so, these considerations must start at the most basic concept of auto-loading firearms \u2013 harnessing energy from a shot to drive the action of the gun.<\/p>\n

When the round in the chamber of a hypothetical gun is detonated, the powder burns to create rapidly expanding gases, which exert outward pressure and force in all directions.\u00a0 In general, the force directed forward is expressed by driving the bullet out of the barrel, the rearward force expressed as recoil energy, and the remaining outward forces expressed as contained (hopefully) chamber pressure. At the core of all auto-loading designs is the balance between using and containing that pressure \u2013 open the breech too late and there isn\u2019t enough force remaining to drive the action; open it too early and risk burst casings, gas, and shrapnel.<\/p>\n

Therefore, in categorizing these arms, the central focus will be given to defining them by the mechanisms that lock, or otherwise balance, these forces.\u00a0 Ancillary to these categories are the closely related operating systems that harness the energy of firing to manipulate these locking mechanisms.\u00a0 While there are many other ways these guns may be categorized (by fire control design, magazine loading and feeding methods, etc.), the variation found in these are not as critical to the core functions of the actions of these guns as are locking and operating systems, and are therefore not going to be widely considered in the following.<\/p>\n

\"\"<\/p>\n

The energy of firing can be harnessed in many ways and by many mechanisms, but in general these can be narrowed down into three broad categories: unlocked systems, locked systems, and delayed systems.<\/p>\n

Unlocked systems are usually the simplest systems.\u00a0 The barrel and breechface are in no way mechanically interconnected, and when they are at rest, they are only held closed by the force of the recoil spring.\u00a0 Upon firing, forces from within the chamber are solely responsible for the opening of the breech.\u00a0 The only counterforce applied comes from the recoil spring and inertial mass of the moving components.<\/p>\n

Locked systems, on the other hand, use much more sophisticated mechanisms.\u00a0 The barrel and breechface are (as the name implies) mechanically interconnected and locked.\u00a0 This is such that the force originating within the chamber is not, on its own, able to directly open the action.\u00a0 While the chamber forces are ultimately used to drive the system, the force needed to unlock the system comes from a source external to the chamber.\u00a0 For instance, the recoil force in a Glock would continue to drive the locked barrel and slide rearward except for the barrel being arrested and pulled out of lock by the comparatively immobile force of the frame, as held firmly by the shooter.\u00a0 In this example, the gun is being unlocked when the barrel encounters the \u201cnormal force\u201d of the frame \u2013 the counterforce exerted by the frame\u2019s resistance to movement.\u00a0 In other locked systems the barrel and breech may be locked closed by the frame and pulled open by the movement of the slide or some other part, but in any case, the gun would remain locked if not acted upon by some force external to the chamber itself.<\/p>\n

Delayed systems are often neither more nor less complex than locked systems, but they do sometimes require a little more head scratching to understand.\u00a0 This comes partially from the wide spectrum of delaying mechanisms found, which range from providing little if any practical delay, to being nearly and debatably locked.\u00a0 In these systems, the barrel and breechface are usually mechanically interconnected, but not fully locked.\u00a0 This means that forces from within the chamber are directly responsible for opening the breech (like an unlocked system), but the counter force applied is greater than mere inertia and spring pressure.\u00a0 There are instead additional mechanical disadvantages baked into the designs that the chamber pressure must overcome in order for the breechface to slip free and open, thus \u2018delaying\u2019 the opening of the action.\u00a0 Unlike a locked system, no external force is needed to unlock the gun, as the energy within the chamber is used directly.\u00a0 However, that energy has to be partially diverted to overcome the specific delaying factors.<\/p>\n

Another way of comparing these three categories can be expressed in the speed at which they open.\u00a0 By nature of their design, unlocked systems begin opening immediately following detonation of the round with the weight of the breech and springs being the only slowing factor.\u00a0 Delayed systems also begin opening immediately following detonation, but the rate at which they open is initially and additionally slowed by the delaying mechanisms employed.\u00a0 Locked systems, on the other hand, do not open immediately; their various components may begin moving immediately after detonation of the round, but there is brief period before that movement completes the unlocking process that allows the breech to open.<\/p>\n

\"\"<\/p>\n

Now that the main categories have been defined and the differences between them sorted out in the most pedantic manner possible, the author shall commence with looking at the various categories and specific mechanics of each.<\/p>\n

(Please Continue to \u201cPistol Phylogeny\u201d Parts 2-6)<\/b><\/p>\n

\"\"<\/p>\n

Pistol Phylogeny Part 2 – Unlocked<\/a><\/p><\/blockquote>\n